- Published on
What "Fully Insured" Means for a Commercial Drone Operator
Key Takeaways
- A Certificate of Insurance (COI) is one-page proof of coverage. It confirms a drone operator's policy exists, but it gives your organization no rights under that policy.
- Being listed as certificate holder is not the same as being additional insured. Only an additional insured endorsement extends the operator's liability coverage to your organization.
- $1 million per occurrence is the common baseline for commercial drone liability. Construction and infrastructure projects typically require $1 million to $2 million, and utility or critical infrastructure work can require $5 million or more.
- Hull coverage protects the drone. Liability coverage protects your people, property, and project. When you review a COI, read the liability section first.
"Fully insured" shows up on almost every drone company's website, including ours. It's one of the first credentials we list. But on its own, the phrase doesn't tell a procurement team, a general contractor, or a risk manager very much. Insured for what? Up to how much? Does the coverage extend to your organization, or only to the operator?
Those are the right questions. If you've ever had to approve a vendor for a job site, a facility, or a live event, someone on your team has asked them internally. This post answers them in plain language: what a Certificate of Insurance (COI) is, what additional insured status does, which liability limits actually matter for commercial work, and why coverage for the drone is not the same thing as coverage for you.
Who Does Commercial Drone Insurance Protect?
FAA Part 107 certification tells you a pilot is licensed to fly commercially. It does not require them to carry insurance. That means the federal rules set no insurance floor. The floor is whatever your contract requires, and whatever your team checks before the first flight.
When a drone operation goes wrong on a commercial site, the exposure rarely stays with the pilot. A drone that strikes a worker, damages a vehicle, or comes down on a neighboring property can pull the property owner, the general contractor, and the company that hired the operator into the claim. Insurance is how that risk gets assigned before anything happens, instead of argued over after.
What Is a Certificate of Insurance (COI)?
A Certificate of Insurance is a one-page document, issued by the operator's insurance carrier or broker, that summarizes the coverage in force on a given date. Think of it as a snapshot of the policy, not the policy itself.
A COI for a commercial drone operator should show:
- Named insured: the legal business you are contracting with. If the name on the COI doesn't match the name on your contract, stop and ask why.
- Insurance carrier and policy number
- Policy effective and expiration dates: the coverage should be active for the full duration of your project, not just the day the COI was issued.
- Coverage types and limits: liability limits per occurrence and, where applicable, in aggregate.
- Certificate holder: your organization, as the party requesting proof.
- Additional insured status: noted on the certificate when it has been added by endorsement.
One detail matters more than it looks: a COI is informational. It confirms coverage exists. It does not change the policy or grant your organization any rights under it. That's the job of an endorsement, which brings us to additional insured status.
What is the difference between a certificate holder and an additional insured?
These two terms get confused constantly, and the difference is important.
- Certificate holder means you received proof of insurance. That's all. If a claim names your organization, being a certificate holder gives you no protection under the operator's policy.
- Additional insured means your organization has been added to the operator's liability policy through an endorsement. If a covered claim arises from the drone operation and your organization is named, the operator's policy responds on your behalf, subject to its terms.
If your contract says the operator must name you as additional insured, a COI that lists you only as certificate holder doesn't meet that requirement.
What Is Additional Insured Status on a Drone Policy, and When Should You Request It?
An additional insured endorsement extends the operator's liability coverage to a third party: usually the client, the property owner, or the general contractor. In practical terms, it means that if someone is hurt or property is damaged because of the drone work, and your organization gets named in the claim, you have a path to coverage under the operator's policy instead of defaulting to your own.
Request additional insured status when:
- The flight happens on property you own, manage, or control. Construction sites, substations, solar farms, commercial buildings, and campuses all fall here.
- You're a general contractor bringing the operator onto a project. Your contract with the owner very likely requires you to pass insurance requirements down to subcontractors.
- Members of the public, crews, or spectators will be nearby. Live events and active job sites carry the highest third-party exposure.
- Your vendor onboarding or master service agreement requires it. Many legal and procurement teams make it standard for any vendor performing work on-site.
On larger projects, it's common for more than one party to need additional insured status: the property owner, the GC, and sometimes a developer or lender. Ask early whether the operator's policy can accommodate multiple additional insureds, and get the full list of entity names from your legal team before the COI is issued.
What other insurance endorsements do construction contracts require?
Construction and enterprise contracts often include insurance language beyond additional insured status. Two terms come up regularly:
- Primary and non-contributory: the operator's policy responds first, before your organization's own insurance is touched.
- Waiver of subrogation: the operator's insurer agrees not to seek recovery from your organization after paying a claim.
Not every drone policy handles these the same way. If your contract requires them, share the exact insurance language with the operator before work is scheduled so it can be confirmed with their broker, not discovered the morning of the flight.
How Much Drone Liability Insurance Do Commercial Clients Require?
Liability limits are usually expressed in two numbers:
- Per occurrence: the most the policy will pay for a single incident.
- Aggregate: the most the policy will pay across all claims during the policy period.
There's no single correct limit. The right number depends on the work, the site, and what your contract requires. Across the industry, though, the ranges are fairly consistent:
- $1 million per occurrence is the common baseline for general commercial work like marketing content and real estate.
- $1 million to $2 million is typical for construction and infrastructure. General contractors and project owners frequently set $2 million as their requirement.
- Higher limits, up to $5 million or more, show up on utility work, work near critical infrastructure, large productions, and some government and municipal contracts.
Where a contract calls for limits above what the primary policy carries, operators can often meet it with umbrella or excess liability coverage layered on top. What matters is that the COI shows the limit your contract requires before anyone flies.
A practical rule: let your contract set the limit, not the operator's default policy. If your organization has a standard vendor insurance requirement, send it at the quoting stage.
What Is the Difference Between Drone Hull Coverage and Liability Coverage?
This is the distinction that trips up the most buyers, because both get called "drone insurance."
Hull coverage insures the aircraft itself. If the drone crashes, flies away, or is damaged, hull coverage pays to repair or replace it. Related coverage may protect the payload (cameras, thermal sensors, LiDAR) and ground equipment. Hull coverage protects the operator's equipment and business continuity.
Liability coverage insures against harm the drone operation causes to others: bodily injury to a person, damage to a building, a vehicle, a structure under construction, or equipment on site. This is the coverage that protects your organization.
From a buyer's perspective, the takeaway is simple: hull coverage protects the operator; liability coverage protects you. An operator can have a fully insured aircraft and still be inadequately covered for the risk that actually concerns your team. When you review a COI, the liability section is the one to read closely.
|
Coverage type |
What it covers |
Who it protects |
Meets a client COI requirement? |
|
Liability coverage |
Bodily injury and property damage the drone operation causes to others |
Your organization, your site, crews, and the public |
Yes, at the limits your contract sets |
|
Hull coverage |
Physical damage to the drone itself from crashes, flyaways, or equipment failure; sometimes payload and ground equipment |
The operator |
No |
|
Manufacturer protection plans |
Repair or replacement of the operator's drone |
The operator |
No |
It's also worth knowing that manufacturer protection plans that cover drone repair or replacement are not insurance in this sense. They provide no liability coverage and won't satisfy a COI requirement.
How Do You Verify a Drone Operator's Insurance? A 7-Step Checklist
- Request the COI before the project is scheduled, not on the day of the flight.
- Confirm the named insured matches the business on your contract.
- Check that the policy dates cover the full project timeline, including any reflights.
- Verify the liability limits meet your contract's per-occurrence and aggregate requirements.
- Confirm your organization (and any other required entities) is listed as additional insured, not only as certificate holder.
- If your contract requires primary and non-contributory language or a waiver of subrogation, confirm those in writing.
- Ask what else is in place: FAA Part 107 certification, airspace authorizations for the site, and a pre-flight risk assessment process.
How Does Cascade Flight Handle Insurance for Commercial Clients?
We list "fully insured" alongside our FAA Part 107 certification because, for the clients we work with, insurance isn't a footnote. It's a condition of getting on site. Every Cascade Flight operation is backed by commercial drone liability insurance, and our certificate of insurance is available on request.
Insurance is one part of a broader approach to risk. Every job starts with a structured pre-flight risk assessment, airspace authorizations are handled before the flight day, and our pilots bring more than 500 documented flight hours to commercial sites across Multnomah, Washington, and Clackamas Counties and the wider Pacific Northwest. The goal is that your legal and procurement teams have what they need in hand before anyone shows up with an aircraft.
If your project requires it, we'll work with you to issue a COI that matches your contract's requirements, including naming your organization as additional insured.
We can add your organization as additionally insured. Let's talk.
Frequently Asked Questions
Do drone operators have to carry insurance?
FAA Part 107 does not require commercial drone operators to carry insurance. In practice, most commercial clients require proof of liability coverage through a COI before work begins, so the requirement comes from your contract rather than federal rules.
What does it mean to be named as additional insured on a drone operator's policy?
It means the operator's liability policy has been endorsed to extend coverage to your organization for claims arising from the drone work. It's different from being a certificate holder, which only means you received proof that the policy exists.
How much drone liability insurance should we require?
$1 million per occurrence is the common baseline for general commercial work. Construction and infrastructure projects often require $1 million to $2 million, and utility, critical infrastructure, and some government work can require $5 million or more. Your contract should set the number.
What's the difference between drone hull insurance and liability insurance?
Hull insurance covers damage to the drone itself. Liability insurance covers injury or property damage the drone operation causes to other people and property. For a client, liability coverage is the one that matters.
How quickly can an operator provide a COI with us as additional insured?
It depends on the operator's carrier, but it shouldn't hold up your project if it's requested early. Send your insurance requirements and the exact entity names at the quoting stage so the certificate is ready before the job is scheduled.